Blank Texas W 14 PDF Template
Form Example
RAILROAD COMMISSION OF TEXAS
OIL AND GAS DIVISION
Form
05/2004
APPLICATION TO DISPOSE OF OIL AND GAS WASTE BY INJECTION
INTO A FORMATION NOT PRODUCTIVE OF OIL AND GAS
1 .Operator Name ______________________________________________________________ 2. Operator
3. Operator Address: _______________________________________________________________________________________________________
4. County ____________________________________________________________________ |
5. RRC District No. ________________________ |
|||||||||||||||||||||||||
6. Field Name _________________________________________________________________ |
7. Field Number ____________________________ |
|||||||||||||||||||||||||
8. Lease Name ________________________________________________________________ |
9. Lease/Gas ID No. _________________________ |
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
10. |
Well is ______ miles in a ________ direction from __________________________ (center of nearest town). |
11. No. acres in lease _______ |
||||||||||||||||||||||||
12. |
Legal description of location including distance and direction from survey lines___________________________________________________ |
|||||||||||||||||||||||||
13. |
Latitude/Longitude, if known (Optional) |
|
|
Lat. ____________________________ Long. __________________________________ |
||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
14. |
New Permit: |
|
Yes |
|
No |
|
|
|
|
If no, amendment of Permit No. __________________ UIC# _________________________ |
||||||||||||||||
15. |
Reason for amendment: |
|
|
Pressure |
|
|
Volume |
Interval |
Commercial |
Other (explain) _____________________ |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
16.Well No. |
|
17.API |
No. |
|
|
|
|
18.Date Drilled |
|
|
|
|
19.Total Depth |
|
|
|
20.Plug Date, if |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
Casing |
|
Size |
|
|
|
Setting |
|
|
Hole Size |
Casing |
|
Cement |
|
Cement |
|
Top of |
|
Top Determined by |
|||||||
|
|
|
|
|
|
|
Depths |
|
|
|
Weight |
|
Class |
|
Sacks (#) |
|
cement |
|
|
|
|
|
||||
21. |
Surface |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22. |
Intermediate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
23. |
Long String |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24 .Liner |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
25. |
Other |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
26. |
Depth to base of Deepest Freshwater Zone ___________________ |
27.Multiple completion? |
|
|
Yes |
No |
|
|||||||||||||||||||
28. |
Multistage cement? |
Yes |
|
No |
|
|
If yes, DV Tool Depth: ________ft. |
No. Sacks: ________Top of Cement: _________ |
||||||||||||||||||
29. |
Bridge Plug Depth: ________ ft. |
30. Injection Tubing |
Size: _____ in. and Depth ______ ft. |
31. Packer Depth: ________ft. |
||||||||||||||||||||||
32. |
Cement Squeeze Operations (List all giving interval and number of sacks of cement and cement top and whether Proposed or Complete.): |
|||||||||||||||||||||||||
|
|
|
|
|
|
|||||||||||||||||||||
33. |
Injection Interval from __________ to _________ ft. |
|
34. Name of Disposal Formation _______________________________ |
|||||||||||||||||||||||
35. |
Any Oil and Gas Productive Zone within two miles? Yes |
|
No |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
If yes, Depth _______________ ft. and Reservoir Name ______________________________________________________________________ |
|||||||||||||||||||||||||
|
|
|
|
|
|
|||||||||||||||||||||
36. |
Maximum Daily Injection Volume __________ bpd |
|
37. Estimated Average Daily Injection Volume _______________bpd |
|||||||||||||||||||||||
38. |
Maximum Surface Injection Pressure ________ psig |
|
39. Estimated Average Surface Injection Pressure____________ psig |
|||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||
40. |
Source of Fluids (Formation, depths and types): ____________________________________________________________________________ |
|||||||||||||||||||||||||
41. |
Are fluids from leases other than lease identified in Item 8? Yes |
|
No |
42. Commercial Disposal Well? |
Yes |
No |
||||||||||||||||||||
43. |
If commercial disposal, will |
|
|
|
Yes |
No |
||||||||||||||||||||
44. |
Type(s) of Injection Fluid: |
|
Salt Water |
Brackish Water |
|
Fresh Water |
|
|
CO2 |
N2 |
Air |
H2S |
||||||||||||||
|
LPG |
|
NORM |
|
|
Natural Gas |
Polymer |
|
Other (explain) _______________________________________________ |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
CERTIFICATE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
I declare under penalties prescribed in Sec. 91.143, Texas Natural |
____________________________________________________________ |
|||||||||||||||||||||||||
Resources Code, that I am authorized to make this report, that this |
Signature |
|
|
|
|
|
|
|
|
|
|
Date |
||||||||||||||
report was prepared by me or under my supervision and direction, and |
____________________________________________________________ |
|||||||||||||||||||||||||
that the data and facts stated therein are true, correct, and complete, to |
Name of Person (type or print) |
|
|
|
|
|
|
|
||||||||||||||||||
the best of my knowledge. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
Phone __________________________ Fax ________________________ |
|||||||||||||
FOR OFFICE USE ONLY |
|
|
|
|
REGISTER NO. |
|
|
|
|
|
|
|
|
AMOUNT $ |
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
APPLICANT ALSO MUST COMPLY WITH THE INSTRUCTIONS ON THE REVERSE SIDE
05/2004
FORM
1.File the original application, including all attachments, with Environmental Services, Railroad Commission of Texas, P.O. Box 12967, Austin, Texas
2.Include with the original application a
3.Provide the current field name (Item 6) and field number (Item 7) designated in Commission records for an existing well. If the application is for a new well, provide the nearest producing field name and number.
4.Check in Item 14 the appropriate box for a new permit or an amendment of an existing permit. If an amendment, check the applicable boxes in Item 15 to indicate the reason for amendment and provide a brief explanation if “other” is checked.
5.If the application is for a new permit, attach a complete electrical log of the well or the log of a nearby well.
6.Attach a letter from the Texas Commission on Environmental Quality (TCEQ) or its predecessor or successor agency stating that the well will not endanger usable quality water strata and that the formation or stratum to be used for disposal does not contain usable quality water. To obtain the TCEQ letter, submit two copies of the Form
7.Attach a map showing the location of all wells of public record within
8.Attach a table of all wells of public record that penetrate the disposal interval and that are within
9.Attach a list of the names and mailing or physical addresses of affected persons who were notified of the application and when the notification was mailed or delivered. Include a signed statement attesting to the notification of the listed affected persons. Notice shall be provided by sending or delivering a copy of the front and back of the application to the surface owner of record of the surface tract where the well is located, each Commission- designated operator of any well located within
10.Attach an affidavit of publication signed by the publisher that the notice of publication has been published in a newspaper of general circulation in the county where the disposal well will be located. Attach a newspaper clipping of the published notice. If the application is for a commercial disposal well, that fact must be stated in the published notice. NOTE: If the application is for an amendment, notification by publication is required only if the amendment is for disposal interval or for commercial status.
11.Attach any other technical information that you believe will facilitate the review of the application. Such information may include a cement bond log, a cementing record, or a well bore sketch.
Additional information is available in the Underground Injection Control Manual, which is available on the Railroad Commission’s website: www.rrc.state.tx.us
No public hearing will be held on this application unless an affected person or local government protests the application, or the Commission administratively denies the application. Any protest shall be in writing and contain (1) the name, mailing address, and phone number of the person making the protest; and (2) a brief description of how the protestant would be adversely affected by the activity sought to be permitted. If the Commission or its delegate determines that a valid protest has been received, or that a public hearing is in the public interest, a hearing will be held upon written request by the applicant. The permit may be administratively issued in a minimum of 15 days after receipt of the application, published notice, or notification of affected persons, whichever is later, if no protest is received.
More PDF Templates
Printable Odometer Reading Form - The form includes a section for the vehicle's identification number.
Class 4 Shingles - The certification does not serve as a warranty from the roofing service.
How to Subpoena - The form includes a space for identifying the witness and their contact information.
Common mistakes
Filling out the Texas W-14 form can be a detailed process. Here are some common mistakes that people often make:
-
Incomplete Information:
Many applicants forget to fill in all required fields. Missing details such as the Operator Name, Operator P-5 No., or the County can lead to delays or denials.
-
Incorrect Fees:
Some individuals fail to include the necessary non-refundable fee of $100. Additionally, if applying for an exception to Statewide Rule 9(9), they might overlook the extra $150 fee.
-
Improper Notification:
Not notifying affected persons as required can be a significant oversight. It’s essential to provide notice to the surface owner and operators of nearby wells, along with a signed statement confirming this notification.
-
Missing Attachments:
Applicants sometimes forget to include important documents, such as maps showing nearby wells or letters from the Texas Commission on Environmental Quality (TCEQ). These attachments are crucial for the review process.
Key takeaways
Filling out the Texas W-14 form is a crucial step for operators looking to dispose of oil and gas waste. Here are some key takeaways to keep in mind:
- Understand the Purpose: The Texas W-14 form is specifically for applying to dispose of oil and gas waste by injection into non-productive formations.
- Provide Accurate Information: Ensure that all sections, such as operator name, address, and well details, are filled out accurately to avoid delays.
- New Permit vs. Amendment: Clearly indicate whether you are applying for a new permit or amending an existing one in Item 14.
- Include Required Fees: A non-refundable fee of $100 is required with the original application. Additional fees may apply for exceptions.
- Attach Supporting Documents: Include necessary attachments such as a TCEQ letter, maps, and well data to support your application.
- Notify Affected Persons: You must inform nearby operators and landowners about your application. A signed statement confirming this notification is required.
- Publication Requirement: An affidavit of publication must be submitted, showing that the application notice has been published in a local newspaper.
- Monitor for Protests: Be aware that a public hearing may be requested if a protest is filed by an affected person or local government.
- Review the Instructions: Always refer to the detailed instructions on the reverse side of the form to ensure compliance with all requirements.
- Seek Additional Information: If needed, consult the Underground Injection Control Manual available on the Railroad Commission’s website for more guidance.
By following these takeaways, you can navigate the application process more effectively and increase your chances of approval.
Steps to Using Texas W 14
Once you have gathered the necessary information and documentation, you can begin filling out the Texas W-14 form. This form is essential for applying to dispose of oil and gas waste by injection into a formation that is not productive of oil and gas. It's important to ensure that all information is accurate and complete to avoid delays in processing your application.
- Start by entering the Operator Name in the designated space at the top of the form.
- Fill in the Operator P-5 No. in the next field.
- Provide the Operator Address, ensuring that it is complete and accurate.
- Indicate the County where the operation will take place.
- Enter the RRC District No. relevant to your operation.
- Write the Field Name and Field Number as designated in Commission records.
- Fill in the Lease Name and Lease/Gas ID No..
- Indicate the distance from the center of the nearest town by filling in the miles and direction in the specified fields.
- State the total number of acres in lease.
- Provide the legal description of the location, including distance and direction from survey lines.
- If known, fill in the Latitude/Longitude coordinates.
- Check the appropriate box to indicate if this is a New Permit or an amendment to an existing permit.
- If it is an amendment, enter the Permit No. and UIC#.
- Specify the reason for amendment and provide an explanation if applicable.
- Complete the well information, including Well No., API No., Date Drilled, and Total Depth.
- If applicable, provide the Plug Date and casing details.
- Indicate the depth to the base of the deepest freshwater zone.
- Answer whether there is a multiple completion or multistage cement.
- Fill in details about the injection tubing size, packer depth, and injection interval.
- Provide the name of the disposal formation.
- Answer whether there are any oil and gas productive zones within two miles and provide the depth and reservoir name if applicable.
- Indicate the maximum daily injection volume and the estimated average daily injection volume.
- Complete the maximum surface injection pressure and estimated average surface injection pressure.
- Describe the source of fluids and answer whether fluids come from other leases.
- Indicate if this is a commercial disposal well and whether non-hazardous oil and gas waste will be disposed of.
- List the type(s) of injection fluid being used.
- Sign and date the certificate section, ensuring that the name of the person preparing the report is typed or printed.
After completing the form, gather all required attachments and submit your application. This includes a non-refundable fee, any necessary maps, and supporting documentation as specified in the instructions. Be sure to keep copies of everything for your records. Once submitted, your application will be processed, and you will receive further instructions or information as needed.